Zinc Surface 0.5mm Cross Tee Fitting Deep Drawn Metal Stamping

T-pipe Model T100 - 100 material Galvanized of Metal Duct Connectors of Deep Drawn Metal Stamping for Ventilation

T-pipe Model T100 - 100 of Metal Duct Connectors from Equipment of Hydraulic Press.

Firstly, the tube blank is placed in the lower die, then the upper die is pressed down, and then the shaft heads at both ends are pressed against the end of the tube blank. Then, the high-pressure liquid is introduced into the central hole of the shaft head, and the required parts are obtained by bulging under the joint action of the high-pressure liquid and axial compression force. The bulging method of axial compression and high pressure liquid is adopted. Bulging belongs to the category of stamping.

Description:

Item: T pipes

Model: T100-100

Material: Galvanized carbon steel 0.5MM thickness

Surface : Zinc 275 mm

Technology: Deep Drawing stamping Part

Diameter:98.80mm

Packaging: into Pallet

Packaging :5700pcs each pallet

Packaging Size:1130*1030*1250mm

Application:

For Duct , Building

0.5mm Cross Tee Fitting

0.197kg Cross Tee Fitting

Cross Tee Deep Drawn Metal Stamping

Zinc Surface 0.5mm Cross Tee Fitting Deep Drawn Metal Stamping Images